Pole barn size guides
Planning references for the sizes people ask about most. The designer starts from a blank building, so these are a starting point rather than a fixed menu.
24x24
576 sq ft
Two vehicles with walk-around room
24x36
864 sq ft
Two vehicles plus a bench or storage bay
30x40
1,200 sq ft
Three bays, or a shop with a vehicle bay
30x50
1,500 sq ft
Shop with a lift and dedicated work zones
40x60
2,400 sq ft
Equipment, trailers, and tall doors
40x80
3,200 sq ft
Long building split across several uses
50x80
4,000 sq ft
Large agricultural or commercial span
60x80
4,800 sq ft
The largest span the designer covers
Any size from 12x12 to 60x80 can be configured, along with wall heights set to the clearance you need. Drawings are drawn to scale against each other and show vehicle outlines for reference only. They are planning illustrations, not construction drawings.
Take a size into the 3D designerBefore you settle on a size
Good to know
- Engineering services and stamped plans are available for an additional fee. Site specific permitting plans start at $2,775 per job.
- Concrete slabs are not part of the kit. Tell your sales rep if you are pouring a slab so the plans match.
- Delivery normally arrives by semi with a 53 foot trailer and a Moffett forklift, so the site needs room for that truck. Straight truck delivery is available by request at additional cost.
- Heritage supplies the building kit. Electrical, plumbing, septic, HVAC, and interior finish work are not in our scope of work or supply. These items would need to be supplied and installed by your local professional.
Ready for a free estimate?
Design your building and get a preliminary budget figure now. A detailed quote follows within about 2 business days.